OEM Activewear Manufacturer
Turn your Tech Pack and buyer-owned activewear specifications into approved Seamless or Cut-and-Sew products and controlled repeat production.
- Start from your Tech Pack, measurements, approved reference, material direction and branding requirements.
- Review technical gaps and manufacturability before committing specifications to production.
- Develop through Seamless or Cut-and-Sew according to the actual product structure.
- Standard samples typically take about 5–10 working days after required development details are confirmed.
For more detail on the underlying service path, review MOVEVOX's OEM activewear development service.
Built for Brands That Already Own the Product Direction
MOVEVOX's OEM service is most relevant to established and growing activewear, yoga, gym and training brands that already control their product concept, specifications or approved references and need a manufacturer to translate those requirements into repeatable commercial production. See the broader activewear product-development system for the development context.
Your Brand Defines the Product
Your team may control the Tech Pack, measurements, fit direction, material, construction, artwork and packaging. MOVEVOX reviews and manufactures against those requirements rather than replacing the brand's product ownership.
Manufacturing Still Requires Technical Judgment
A Tech Pack may contain missing information, conflicting dimensions or requirements that create material, construction or MOQ risks. Those points should be identified before sampling rather than silently interpreted.
OEM Can Start at Different Levels of Completeness
A mature Tech Pack is the strongest OEM starting point, but an existing approved sample, physical material reference or partially complete specification can also support review when the buyer controls the intended product direction.
Repeatability Matters Beyond the First Sample
The objective is not simply to produce one acceptable prototype. Approved specifications, materials, fit, branding and production references need to remain controlled when styles move into bulk and repeat orders.
Understand the Manufacturing Path Before Development Starts
OEM, ODM and Private Label describe different levels of buyer ownership and supplier development responsibility. Defining the path early helps align product inputs, development effort, MOQ and approval expectations.
OEM — Buyer-Owned Specification
The buyer provides or controls the product direction through a Tech Pack, technical measurements, reference sample, materials, construction and brand requirements. MOVEVOX reviews the specification for manufacturability, develops the physical sample and manufactures against the approved standard.
ODM — Development-Led Support
The buyer has a commercial direction but requires more supplier input to establish the manufacturable product. MOVEVOX can support technical translation, materials, pattern or Seamless development and sampling, while the buyer remains responsible for final product approval and brand direction.
Private Label Clarification
Private Label may begin from an existing or already-developed garment and focus more heavily on branding, labels and packaging. It should not be confused with specification-led OEM where the buyer controls the underlying product. Explore Private Label Activewear.
What a Strong OEM Tech Pack Should Control
A Tech Pack becomes useful to manufacturing when it gives development, production and QC a consistent technical reference. The exact format may vary by brand, but the following information commonly reduces interpretation risk.
Technical Flats
Front, back and relevant detail views should show the intended product construction clearly enough for technical review.
POM and Measurements
Point-of-measure definitions, base-size measurements and tolerances help convert intended fit into measurable manufacturing requirements.
Material Specification
Fabric or yarn information may include composition, GSM, supplier reference, handfeel, stretch direction, color and other product-specific requirements.
Construction Details
Seams, panels, pockets, waistbands, straps, pads, knitted zones and finishing methods should be defined where they affect product execution.
BOM and Trims
Elastic, pads, zippers, labels, drawcords and other components should be identified where relevant to the product.
Color Standards
Pantone references or approved physical standards should identify required colors while recognizing that final appearance depends on the actual material.
Branding Files
Logo artwork, position, dimensions, labels, hangtags and other branded elements should be linked to the correct style and size information.
Packaging Requirements
Polybags, barcode, SKU stickers, carton marks and other packaging instructions should be included when they form part of the released commercial product.
Control note: A detailed Tech Pack does not eliminate the need for technical review. If requirements conflict with each other or with material and manufacturing conditions, those conflicts should be resolved before the specification becomes a production standard. Related process detail is available in MOVEVOX manufacturing guides.
Protect Your Product Information Before OEM Development
MOVEVOX can support NDA-led discussions and reasonable confidentiality requirements covering Tech Packs, unreleased products, measurements, artwork, samples, pricing and other project information.
For an OEM buyer, a Tech Pack may represent years of product development and brand-specific fit knowledge. Information handling is therefore part of supplier governance rather than only an administrative issue.
NDA Before Sensitive Disclosure
Where required, a buyer-provided NDA can be reviewed before proprietary technical or commercial information is exchanged.
Tech Pack Confidentiality
Technical files, measurements, construction details and unreleased product information should remain customer project information rather than public marketing content.
Need-to-Know Handling
Internal team members and approved manufacturing resources should receive only the information required to execute their assigned project responsibilities.
Sample and Artwork Control
Physical samples, logos and branded information should not be publicly displayed or reused for marketing without appropriate customer permission.
Factory Visit Confidentiality
Buyer visits and audits should verify the requesting customer's supplier program without unnecessarily exposing another customer's proprietary product or documentation.
Key Facts for Initial OEM Supplier Screening
These are current operating references. Actual OEM feasibility still depends on the product, materials, customization, quantity, approval status and available production window.
Santoni Machines
Italian Santoni Seamless knitting machines at MOVEVOX's Yiwu core manufacturing facility.
Garment Machines
Main sewing and garment-production equipment supporting core Cut-and-Sew manufacturing.
Development Team
Approximately two design, two pattern and four sample/development team members.
QC Staff
Dedicated QC personnel supporting product-development and bulk-production quality activities.
Working Days
Typical standard sample timing after the required development details are confirmed.
Base MOQ
Approx. 100 pcs/style for Seamless and 150 pcs/style for Cut-and-Sew.
Pieces / Month
Approximate stable managed finished-garment capacity across the current controlled manufacturing system.
For a broader explanation of the supplier model, see Why MOVEVOX.
Where OEM Activewear Specifications Commonly Lose Control
OEM risk usually appears when buyer-owned product information is incomplete, changed or transferred incorrectly between development and production.
Missing or Conflicting Specifications
Measurements, construction, material or artwork instructions may conflict across different Tech Pack pages.
MOVEVOX ResponseOpen issues should be identified during technical review and confirmed before sampling or release.
Version Drift
Production may accidentally use an earlier measurement chart, pattern, Seamless program or artwork.
MOVEVOX ResponseApproved changes should be incorporated into the current released product version.
Material Substitution
A substituted fabric or yarn may change fit, appearance, stretch, recovery or production behavior.
MOVEVOX ResponseMaterial changes should be disclosed and reviewed before they replace an approved reference.
Fit Drift
Subjective fit comments may be implemented in a sample without being transferred into measurable specifications.
MOVEVOX ResponseApproved fit decisions should flow into measurements, pattern/program and later bulk inspection references.
Sample-to-Bulk Gap
The development sample may be acceptable while bulk production uses different inputs or execution conditions.
MOVEVOX ResponsePre-production review and First Article verification help reconnect approved development with actual bulk conditions.
Production-Site Change
An unapproved facility change can introduce different equipment, operators and controls.
MOVEVOX ResponseMOVEVOX distinguishes its core factory from satellite capacity and can follow customer-defined production-site restrictions.
Why MOVEVOX Can Be Evaluated as an Activewear OEM Partner
MOVEVOX combines an owned manufacturing base, product-development resources, two core manufacturing routes and controlled extended capacity.
Manufacturing-Driven
The Yiwu core factory supports technical development, sampling, core production and QC rather than functioning only as a commercial sales office.
Two Manufacturing Routes
Twenty-eight Italian Santoni machines support Seamless production, while approximately 24 main garment machines support core Cut-and-Sew manufacturing.
Development Between Sales and Production
An approximately eight-person development function supports design interpretation, pattern work and sample development before bulk manufacturing.
Flexible OEM Entry
Current base MOQ references begin around 100 pcs/style for Seamless and 150 pcs/style for Cut-and-Sew under applicable normal conditions.
Controlled Commercial Scale
Stable managed capacity is approximately 150,000–200,000 finished garments per month across the current controlled manufacturing system.
Transparent Capacity Structure
MOVEVOX identifies its owned core factory separately from six long-term Yiwu and two long-term Guangzhou satellite factories.
For company background and operating context, see About MOVEVOX.
Core Activewear Categories for OEM Development
MOVEVOX's strongest OEM product relevance is concentrated in yoga, gym, training and activewear products. The manufacturing route should be selected according to each product's actual structure.
Leggings
A core category that can use Seamless or Cut-and-Sew development depending on waistband, fabric, pockets, panels, fit and knitted structure.
Sports Bras
Can be developed through Seamless or sewn construction according to straps, coverage, underbust structure, pads, material and intended fit.
Training Shorts
OEM specifications may control waistband, inseam, pockets, material, panels, fit and branded details.
Biker Shorts
Can be developed through Seamless or Cut-and-Sew routes according to waistband, length, material and construction.
Tanks
Neckline, armhole, body fit, material, length and manufacturing route can be controlled through the buyer's specification.
T-Shirts
Pattern, neckline, sleeve, body measurements, fabric, branding and private-label details can be managed as product-specific OEM requirements.
Long-Sleeve Tops
Suitable for activewear collections requiring controlled sleeve, body, neckline, material and branding specifications.
Coordinated Sets
Multiple SKUs can share selected materials, colors and branding while maintaining separate technical specifications and approval references.
A Tech Pack Does Not Automatically Mean a Style Is Production-Ready
OEM capability should be based on repeatable manufacturing strength, not simply willingness to quote every design submitted by a buyer.
| Capability Level | Product Direction | MOVEVOX Position |
|---|---|---|
| Core Strength | Leggings, sports bras, yoga/fitness shorts | Established activewear product categories |
| Strong Regular | Biker shorts, tanks, T-shirts, long sleeves, activewear sets | Suitable for recurring OEM development |
| Technical Review | Complex multi-material products or unusual structures | Material, equipment, MOQ and QC require review |
| Technical Review | Products using unfamiliar processes outside regular production | Capability must be confirmed before commitment |
| Outside Core Positioning | Specialist team jerseys and complete sport-uniform systems | Not represented as primary MOVEVOX specialization |
| Not Accepted | Counterfeit or intentionally infringing products | MOVEVOX does not accept intentionally infringing projects |
What to Send With an OEM Activewear Project
A Tech Pack is the main technical input, but additional physical and commercial references can improve review accuracy.
Tech Pack — Primary
Provide the current technical document containing drawings, measurements, construction and available product requirements.
Measurement and Fit Reference — Recommended
Include base-size POMs, grade information, existing fit comments or an approved reference garment where applicable.
Fabric or Yarn Reference — Recommended
Provide material code, swatch, composition, GSM, supplier information or an approved physical reference where available.
Color Standard — Recommended
Provide Pantone or an approved physical color standard where color consistency is important.
Artwork and Branding — Recommended
Include logos, labels, placement, dimensions and packaging artwork required for the commercial product.
Reference Sample — Optional
A legal physical reference can help communicate fit, material, workmanship or construction where written specifications are incomplete.
Quantity Structure — Required for Commercial Review
Share style quantity, colors and size breakdown so garment and upstream material minimums can be reviewed realistically.
Target Timing — Required for Planning
Provide required sample, launch or delivery timing so development and capacity assumptions can be checked against actual scheduling conditions.
Fabric-specific preparation can be supported through custom fabric development and custom color development.
Six Questions We Review Before OEM Sampling
Technical review reduces the risk of turning an unclear or contradictory specification directly into a physical product.
Is the Product Structure Fully Defined?
Panels, pockets, straps, waistbands, pads, seams, knitted zones and other relevant construction details should be identifiable.
Are Measurements Internally Consistent?
POM definitions, base-size measurements and product proportions should be reviewed for obvious conflicts before pattern or Seamless-size development.
Does the Material Fit the Product?
Fabric or yarn direction should be considered together with structure, fit, appearance, manufacturing route and commercial MOQ.
Is the Manufacturing Route Appropriate?
MOVEVOX reviews whether the product is better suited to Seamless knitting or Cut-and-Sew construction.
Are Branding Requirements Production-Ready?
Artwork, position, dimensions, labels and packaging need sufficient definition before they can become reliable production references.
Are There Commercial Constraints?
Quantity, color allocation, custom dyeing, trims and production timing can make a technically possible product commercially impractical at a particular order structure.
Is the OEM Specification Ready for Repeat Manufacturing?
A design can be possible to sample once without being sufficiently stable or commercially practical for repeat production. MOVEVOX reviews materials, structure, manufacturing route, MOQ, quality controls and repeatability before treating a product as bulk-ready.
Green — Ready to Develop
The product fits established manufacturing capabilities and available technical information is sufficiently complete for controlled sampling.
Yellow — Clarification or Adjustment Required
The product appears feasible, but one or more material, construction, quantity or technical conditions still require resolution.
Red — Redesign or Decline
The proposed specification may be unstable, commercially impractical or outside confirmed manufacturing capability and should not receive an unsupported production commitment.
Manufacturing Feasibility Is More Than Prototype Feasibility
Repeat production also depends on material availability, upstream MOQ, production efficiency, quality-control requirements and the ability to reproduce approved dimensions and construction consistently.
Keep Activewear Materials Connected to the Approved Specification
In OEM activewear, material is part of the product specification. Fiber content alone is not enough to ensure the same fit, appearance or production behavior.
Nylon / Spandex Knit
Commonly relevant to leggings, sports bras and selected activewear products. Actual structure, weight and physical behavior require product-specific approval.
Polyester / Spandex Knit
Can be evaluated for selected activewear products according to structure, stretch, appearance and commercial requirements.
Seamless Yarn System
Yarn selection interacts with Santoni programming, knitted density, garment size and engineered zones.
Brushed Stretch Material
Surface treatment can affect handfeel, appearance, thickness and stretch behavior and should be approved on the actual product.
Rib Structure
Rib may be produced through Cut-and-Sew fabric or Seamless knitting and should be evaluated within the intended garment construction.
Textured Structure
Texture can affect dimensions, stretch, color appearance and branding execution and therefore requires physical validation.
Customer-Nominated Material
When the buyer identifies an existing fabric or mill reference, MOVEVOX can review sourcing availability, MOQ and manufacturing implications.
Material Substitution Control
A proposed replacement should not silently become the production material. Differences that may affect the approved product should be disclosed and reviewed before use.
For deeper sourcing context, see Custom Fabric and Activewear Fabric Guides.
Control Legging Fit From Waist to Hip
Legging fit depends on the relationship between garment measurements, stretch material and body geometry. OEM execution should convert the buyer's intended fit into measurable product references.
Waist and Waistband
Waist opening, waistband height and construction affect how the product sits and feels on the body. A visual waistband design alone does not define the finished fit. Approved changes should be reflected in the measurement specification and current pattern or Seamless program rather than remembered only from verbal sample comments.
High Hip and Full Hip
The relationship between waist, high hip and full hip influences body contour and perceived compression. Material stretch can change the physical result even when nominal measurements remain similar. Fit review should therefore consider the approved material together with the actual garment measurements and construction route.
Rise and Inseam
Front rise, back rise, crotch structure and inseam work together with hip dimensions to determine coverage and proportion. OEM approval should translate fit comments into measurable changes so the same decision can later be applied to grading and bulk measurement.
Related category detail: Private Label Leggings Manufacturing.
Translate Sports Bra Fit Into Manufacturable References
Sports bras combine body measurements, fabric or knitted structure, straps, coverage and underbust construction. These variables should be controlled together during OEM development.
Underbust and Body Fit
Underbust dimensions and material behavior influence how the bra sits on the body. The same measurement can perform differently when fabric, elastic or knitted density changes. The approved material and measurement specification should therefore remain linked during fit development.
Coverage, Neckline and Body Length
Front coverage, neckline, armhole and body length influence the intended silhouette and customer fit perception. Buyer comments such as "more coverage" or "higher neckline" should be converted into measurable technical changes before approval.
Straps, Pads and Construction
Strap width, position, pad design or openings and other structural features can affect both fit and production complexity. Those requirements should be defined in the current product specification and physically confirmed where relevant before bulk production.
Related category detail: Sports Bra Manufacturing.
Convert Fit Approval Into a Bulk-Control Standard
Fit becomes useful to production only when buyer feedback is transferred into measurable and current product information.
| Stage | Purpose | Controlled Output |
|---|---|---|
| Target Size | Define base fit direction | Base-size framework |
| POM Setup | Define measurement locations | Measurement chart |
| Pattern / Program | Convert measurements into garment geometry | Current pattern / Seamless program |
| Fit Sample | Evaluate physical fit | Fit comments |
| Revision | Apply agreed corrections | Updated specification |
| Grade Rules | Define size progression | Grading logic |
| Size Set | Verify additional sizes | Size-level approval |
| PP Sample | Establish applicable production reference | Approved physical reference |
| Bulk Measurement | Check finished production | Inspection record |
Control note: An approved physical sample should not replace the technical specification. The strongest OEM standard combines both physical and measurable references.
Translate Seamless Specifications Into Controlled Knitting
MOVEVOX operates 28 Italian Santoni Seamless knitting machines at its Yiwu core facility. OEM Seamless execution depends on the connection between yarn, program version, size and knitted structure.
Yarn Reference
The approved yarn influences appearance, elasticity, handfeel and machine behavior and should remain connected to the released style.
Program Version
The machine program translates the approved product structure into a repeatable knitted form. Superseded programs should not remain active for later production.
Waistband and Rib
Knitted rib structures can be engineered into waistbands or other specified areas according to the approved design.
Mesh Zones
Mesh can be integrated where the product specification requires it. Placement and openness should be physically approved without unsupported performance claims.
Texture and Engineered Zones
Local knitted structures can create design differentiation but may influence garment dimensions and require tighter program control.
Necessary Sewing
Seamless products can still require sewing at selected crotch, shoulder, neckline, label, pad-opening or finishing points.
Technical note: When yarn, program, density or size changes, the physical product can also change. OEM Seamless control therefore depends on managing these elements as one released product system rather than independent manufacturing variables.
Execute Pattern-Based Activewear Specifications Through Cut-and-Sew
Approximately 24 main sewing and garment-production machines at the Yiwu core facility support pattern-based activewear requiring cut panels and sewn construction.
Pattern Engineering
The current pattern converts buyer-approved measurements and fit decisions into cuttable garment geometry.
Controlled Cutting
The released pattern and approved material should remain connected before components move into sewing.
Overlock Construction
Overlock can be used at selected joining or edge-construction points according to the approved product specification.
Flatlock Construction
Flatlock may be used where the garment construction requires a flatter joined seam and suitable material behavior.
Coverstitch Finishing
Selected hems or finishing points can use coverstitch or related construction according to the released product standard.
Complex Assembly
Pockets, panels, pads, straps, elastics and multiple materials create additional assembly and quality-control points.
Control note: In OEM Cut-and-Sew manufacturing, pattern version, material, construction and measurement references must remain aligned. An approved sample cannot compensate for an outdated production pattern.
Keep Brand Specifications Connected to the OEM Product
Branding and packaging are part of the released commercial specification and should remain linked to the correct style, size and color.
Product Specification
Fabric or yarn, fit, color, construction and the applicable approved physical sample form the technical product definition.
- Approved material
- Fit standard
- Color
- Construction
- Applicable approved sample
Brand Identity
Logos, main labels, size labels, care labels and hangtags should correspond to the approved artwork and correct product.
- Logo
- Main label
- Size label
- Care label
- Hangtag
Retail and Packing Specification
Polybags, SKU stickers, barcodes, custom packaging and carton marks should remain linked to the correct style, size and color.
- Polybag
- SKU sticker
- Barcode
- Custom packaging
- Carton mark
Related specialist pages: Custom Logo, Custom Labels and Custom Packaging.
Use Sampling to Verify the OEM Specification
Sampling should progressively confirm the product rather than replace incomplete technical information.
Technical Review
Review the current Tech Pack, measurements, material, construction, branding and unresolved requirements.
Technical Setup
Prepare the required pattern or Seamless program and confirm relevant material references.
Sample Build
Produce the sample through the appropriate manufacturing route.
Internal Check
Review relevant measurements, workmanship and product requirements before customer evaluation.
Buyer Review
The buyer evaluates the actual product and consolidates required fit, measurement, material or construction changes.
Controlled Revision
Approved feedback is incorporated into the current technical version and pattern or Seamless program.
Approval
Development progresses toward the applicable Fit, Size Set, PP or other agreed production-approval reference.
Timing: Standard samples typically require approximately 5–10 working days after the required development information has been sufficiently confirmed. Custom materials, complexity and additional revision rounds can extend the full development calendar.
Freeze the Approved Standard Before Bulk Production
OEM approval should create one current production reference system linking the buyer's latest specification, physical sample, materials, fit and brand execution.
Approved Standard
Current Tech Pack
The released Tech Pack should incorporate approved measurements, construction and other technical revisions.
Current Pattern or Seamless Program
Production should use the pattern or machine program corresponding to the approved product version.
Approved Material and Color
Bulk fabric or yarn should remain linked to the approved material and color reference unless a change receives buyer review.
Approved Fit and Branding
Fit comments should already be reflected in released measurements; logo, label and artwork information should correspond to the same current style version.
Bulk Transfer Controls
Physical Approval Reference
Where applicable, the Approved or PP Sample provides a physical workmanship and appearance reference.
First Article Verification
A representative garment produced with actual bulk inputs helps confirm that the released standard has transferred into production conditions.
Bulk QC
In-line and finished-product inspection then uses the applicable specification and physical references to monitor production.
Controlled Objective
The target is controlled manufacturing within approved technical, material, workmanship and quality requirements—not a claim of mathematical identity between every garment and one sample.
Calculate OEM MOQ From the Actual Specification
MOVEVOX's garment base MOQ is only the starting reference. OEM specifications can create separate material, color, trim, branding and packaging minimums.
| Requirement | Current Reference | Important Boundary |
|---|---|---|
| Seamless Base MOQ | ~100 pcs/style | Subject to yarn, program, size split and customization |
| Cut-and-Sew Base MOQ | ~150 pcs/style | Material, trims and construction still require review |
| Standard Color Allocation | 50 pcs/color | Normal available-color conditions |
| Seamless Size Split | Normally ≥20 pcs/size | Style-specific |
| Cut-and-Sew Size Split | Normally ≥10 pcs/size | Product-specific |
| Custom Dyeing | Often ~400–600 garment-equivalent pcs/dye lot | Depends on material and structure |
| Custom Logo | Project-specific | Method and setup can affect minimum |
| Labels / Packaging | Project-specific | Upstream supplier MOQ may exceed garment MOQ |
Commercial note: A technically correct Tech Pack does not override upstream supply-chain minimums. Final OEM MOQ should therefore be confirmed against the actual released product and sourcing plan. See Activewear MOQ & Cost Guides for related sourcing guidance.
Ready to Put Your Tech Pack Through Manufacturing Review?
Send your current specification, existing approved sample or project information. MOVEVOX can review product fit, technical gaps, manufacturing route, material, MOQ and the appropriate next OEM step.
NDA-led technical discussions can be arranged before confidential project information is exchanged.
How a Released OEM Specification Moves Into Bulk
Bulk production begins after the product, commercial requirements and applicable quality references are sufficiently controlled.
Order Release
Confirm style, quantity, size/color allocation, current specification, approved references, delivery requirement and production-site conditions.
Owner: Project / Order Team
QC Node: Release Check
Material Readiness
Confirm actual fabric, yarn, trims, labels, branding and packaging inputs.
Owner: Materials
QC Node: Material Check
Pre-Production Review
Align technical, production, materials and QC teams around the same current product version.
Owner: Project Team
QC Node: PP Review
First Article
Produce a representative garment using actual bulk-production inputs.
Owner: Production
QC Node: First Article
Bulk Manufacturing
Proceed through the released Seamless or Cut-and-Sew route.
Owner: Production
QC Node: Process Control
In-Line Inspection
Check product while production is still active.
Owner: QC
QC Node: Inline Check
Finished Inspection
Review completed garments against applicable measurements, construction and workmanship requirements.
Owner: QC
QC Node: Finished Check
Packing and Release
Verify brand, SKU, barcode, packaging and shipment-preparation requirements.
Owner: Packing / Order Team
QC Node: Final Release
Capacity for OEM Launches, Reorders and Scale-Up
MOVEVOX separates stable managed capacity from theoretical equipment output. Actual delivery commitments require style- and timing-specific review.
Pieces / Month
Approximate stable managed finished-garment capacity across MOVEVOX's current controlled manufacturing system.
Santoni Machines
Italian Santoni Seamless knitting machines at the Yiwu core facility.
Garment Machines
Main sewing and garment-production equipment at the core facility.
QC Staff
Current dedicated quality-control resources.
Yiwu Satellites
Long-term satellite production resources that can support appropriate approved bulk requirements.
Guangzhou Satellites
Long-term satellite resources providing additional controlled capacity for relevant products.
Core Production Space
Approximate actual production space associated with the core manufacturing operation.
Typical Bulk Reference
Subject to material readiness, approvals, complexity, quantity and available capacity.
Capacity note: A successful sample does not reserve unlimited future capacity. Larger or time-sensitive OEM programs should receive a project-specific capacity check before delivery commitments are confirmed.
The Core Manufacturing Base Behind MOVEVOX OEM Programs
The approximately 6,000-square-meter Yiwu core operation functions as the technical, sample, core-production and quality-control center within the wider MOVEVOX manufacturing system.
Seamless Production
Twenty-eight Italian Santoni machines support relevant Seamless activewear development and production. Yarn, program, size and structure remain product-specific.
Cut-and-Sew Production
Approximately 24 main garment-production machines support pattern-based activewear requiring sewn construction.
Development and Sampling
An approximately eight-person development organization supports design interpretation, pattern work and sample development.
Material Coordination
Fabric, yarn, trims and related inputs are coordinated around product requirements. This does not imply that all upstream material processes are MOVEVOX-owned.
Quality Control
Five dedicated QC personnel currently support quality activities across development and bulk manufacturing.
Packing and Release
Branding, labels, barcodes and packaging can be checked against SKU-specific order requirements before shipment preparation.
Factory context and company background: About MOVEVOX.
Who Connects Your Tech Pack to Production?
OEM execution requires more than a sales contact. Different functions need to interpret, develop, manufacture and inspect the same released product standard.
Project / Commercial Coordination
Coordinates buyer requirements, quotations, timeline, approvals and communication between the customer and internal manufacturing functions.
Design Interpretation
Two current design-team members support interpretation and development work where visual or product-direction clarification is required.
Pattern Development
Two current pattern team members support pattern-based Cut-and-Sew product development and revision.
Sample / Development
Approximately four current sample/development team members support physical product creation, adjustment and development execution.
Production
Seamless and Cut-and-Sew manufacturing resources execute the released product through the appropriate production route.
Quality Control
Five dedicated QC staff support inspection activities from development through commercial manufacturing.
Role note: The development organization totals approximately eight people across design, pattern and sample/development functions. Individual project assignments may vary according to product and workload.
Inspect OEM Production Against the Approved Standard
MOVEVOX currently has five QC staff. Quality control should reference the buyer's released product requirements rather than rely only on general workmanship judgement.
Material Check
Verify applicable fabric, yarn, trims and visible material characteristics against the project reference before use.
Pre-Production Review
Confirm that production, technical and quality teams are working from the same current product version.
First Article
Review a representative garment produced with actual commercial-production inputs.
In-Line Inspection
Check measurements, construction, knitted structure and workmanship while production remains active.
Measurement Control
Finished dimensions should be checked at defined POMs against the applicable released specification and tolerance.
Finished Garment Review
Completed products are assessed against the relevant workmanship and physical reference.
Branding and Packaging
Logo, labels, SKU information and packaging should correspond to the correct released product.
Final Release
Applicable checks and outstanding quality issues should be completed before shipment release.
Hold, Rework and Corrective Action
Products that do not meet requirements may be held, sorted, reworked, replaced or re-inspected. Significant recurring issues may require root-cause review and corrective action.
Related detail: Quality & Compliance and Activewear Quality Guides.
Show How the Approved Specification Is Checked in Production
Useful OEM evidence should demonstrate what was checked, which product requirement applied and how the result was recorded.
Material Verification
Show an actual fabric, yarn or trim comparison linked to a real development or production project.
First Article Review
Show a real First Article with an anonymized current technical or measurement reference.
POM Measurement
Show an actual garment being measured at a defined point against a current specification.
In-Line Inspection
Show QC activity during real Seamless or Cut-and-Sew production.
Construction Review
Show a real seam, knitted zone, panel, waistband or other controlled workmanship point.
Branding Verification
Show logo or label execution being checked against the approved artwork or product reference.
Packaging Verification
Show style, size, color, barcode or packaging information being cross-checked.
Final / Corrective Record
Show a genuine anonymized final inspection, re-inspection or corrective-action record.
Support Independent Inspection When Your OEM Program Requires It
Where a buyer requires external verification, MOVEVOX can coordinate around the customer's nominated inspection or testing provider and the agreed order scope.
Evidence note: MOVEVOX should not fabricate an SGS, BV, Intertek or other inspection report, nor publish invented AQL figures or pass rates.
Defined Order and Site
The inspection should identify the relevant order, style, quantity and manufacturing location.
Sampling Method
Sampling quantity and method should follow the buyer or appointed inspection provider's agreed protocol.
Measurement Criteria
Measurement inspection should reference the current released specification and applicable tolerances.
Defect Criteria
Any defect classification and acceptance threshold should come from the agreed customer or third-party inspection requirement.
Corrective Action
Identified issues may require sorting, rework or re-inspection before shipment release.
Final Release
The third-party result should be interpreted within the actual order and agreed customer approval process.
Read Testing Evidence by the Product and Scope It Actually Covers
A laboratory test report supports the sample and test scope identified in that document. It should not be extended to every MOVEVOX fabric, product or future production lot.
RoHS-Related Tested Sample
Report TST20250405148E, dated April 30, 2025, covers an identified black fitness yoga leggings sample submitted by Yiwu Chenjin Import And Export Co., Ltd. The connected Certificate of Compliance states that the tested sample complied with the referenced RoHS 2.0 requirements and also specifies that the certificate applies only to the tested sample.
REACH Phthalate Tested Sample
Report TST20250405150E, dated April 30, 2025, covers the identified black fitness yoga leggings sample / fabric and records a Pass result for the requested REACH Annex XVII Entry 51 & 52 phthalate testing.
What the Evidence Does Not Mean
These documents do not prove that every MOVEVOX product has been tested, every fabric or color has the same result, the entire factory is "RoHS certified," or all MOVEVOX products have blanket REACH compliance.
Buyer-Specific Requirements
If an OEM customer requires additional restricted-substance, material, performance or market-specific testing, the exact product, sample, laboratory, method and responsibility should be confirmed for that program.
Testing and quality context is also summarized on Quality & Compliance.
Prepare the Yiwu Core Factory for OEM Vendor Qualification
MOVEVOX can support buyer-defined factory review and supplier-qualification discussions. Audit body, protocol, date and reporting requirements remain customer-specific.
Audit status note: This module describes audit readiness and does not claim that MOVEVOX has passed an unnamed current third-party audit.
Factory Identity
Core facility: 97 Xiazhang Village, Fotang Town, Yiwu City, Zhejiang, China.
Production Areas
A buyer review may cover Seamless, Cut-and-Sew, development, QC and packing areas relevant to the intended OEM program.
Equipment
Relevant manufacturing equipment can be reviewed against the category and process the buyer intends to qualify.
Quality Records
Applicable material, First Article, measurement, in-line and finished-garment records may support process review where confidentiality permits.
Product Traceability
Buyer qualification may examine how current technical versions, samples, materials and production references are connected to the correct project.
Production Allocation
The review can distinguish what is performed at the core factory and how approved satellite capacity may be used.
Know Where Your OEM Product Is Actually Manufactured
MOVEVOX combines an owned Yiwu core factory with long-term satellite production resources and specialized external suppliers. Their roles should remain clearly differentiated.
Owned Yiwu Core Factory
The core facility supports technical development, sampling, standard-setting, core production and quality-control functions.
Six Yiwu Satellite Factories
Long-term satellite factories in the Yiwu area can support suitable approved bulk-production requirements.
Two Guangzhou Satellite Factories
Long-term Guangzhou resources provide additional manufacturing capacity for relevant products and programs.
Material Suppliers
Fabric, yarn, dyeing and related upstream processes may involve external specialist suppliers according to the actual specification.
Brand and Packaging Suppliers
Labels, logos, hangtags and packaging may involve specialized external vendors coordinated against the buyer's approved product requirements.
Buyer Site Restrictions
Where a customer requires production at an approved site or restricts subcontracting, the applicable facility and approval process should be agreed before allocation.
Management note: MOVEVOX does not represent all extended manufacturing capacity or upstream resources as company-owned.
Connect OEM Claims to Evidence With Defined Scope
Supplier qualification becomes more efficient when the buyer can trace operational claims to specific identity, factory, equipment, development, quality or testing evidence.
Yiwu Chenjin Import And Export Co., Ltd.
Supports the entity behind contracts and commercial activity.
Yiwu manufacturing base
Supports physical manufacturing and development presence.
Italian Santoni Machines
Supports core in-house Seamless capability.
Garment Machines
Supports core pattern-based garment manufacturing capability.
Development Team
Supports product development as an actual organizational function.
QC Staff
Supports quality control as a defined operating function.
Scoped Test Reports
Supports specified laboratory results for the identified tested sample only.
For additional supplier-research context, use MOVEVOX Sourcing Guides.
Case: From Buyer Tech Pack to Repeat Activewear Production
An anonymized U.S. fitness customer provides a documented example of a Tech-Pack-led development process that progressed through revisions, limited user testing, private-label execution and recurring commercial orders.
Customer Context
The customer operates a U.S. fitness-focused personal brand with an audience of more than 30,000 followers and a product direction serving curvier and plus-size consumers. The program included multiple activewear categories such as leggings, shorts, sports bras and tops.
Starting Input
The customer already owned Tech Packs and a defined product direction. MOVEVOX therefore entered the relationship through specification-led product development rather than selecting generic stock garments.
Version One and Version Two
The first development sample translated the available Tech Pack into a physical product for review. Buyer feedback from the first sample was incorporated into a revised second version before the program progressed further.
Limited User Testing
After revision, approximately 5–10 units were prepared for follower testing, providing the customer with an additional evaluation stage before larger production.
Brand and Packaging Execution
Commercial requirements included custom logo, labels, care information, packaging and QR codes. The QR-code requirement created additional packing-control complexity because the correct information needed to remain matched to each product variation.
Repeat Commercial Orders
The documented relationship progressed to approximately 2,000 pieces per order and around two orders per month during the recurring purchasing period.
Long-Term Relationship
The documented customer relationship has continued for approximately three years. All quantities, order frequency, audience size and relationship duration belong to this specific anonymized customer case and are not guarantees for another OEM program.
Compare OEM Manufacturing Models Before Supplier Nomination
Different supplier models solve different sourcing problems. The strongest choice depends on how much product control your brand already owns and how much manufacturing flexibility and scale it requires.
| Evaluation Area | Stock Private Label | Trading / Sourcing Company | Small Single Factory | Strategic-Scale OEM | MOVEVOX |
|---|---|---|---|---|---|
| Buyer-Owned Tech Pack | Limited relevance | Can coordinate | Usually accepted | Strong capability | Core OEM input |
| Product Development | Mainly existing styles | Network-dependent | Team-dependent | Extensive | ~8-person development function |
| Seamless | Product-dependent | Vendor-dependent | Equipment-dependent | Group-dependent | 28 Santoni at core |
| Cut-and-Sew | Product-dependent | Vendor-dependent | Equipment-dependent | Group-dependent | ~24 garment machines |
| Base MOQ | Often stock-style driven | Supplier-dependent | Factory-dependent | Program-dependent | ~100 Seamless / ~150 C&S |
| Initial Flexibility | Usually high | Often high | Can be flexible | Usually program-driven | Flexible OEM entry |
| Scale Path | Product/supplier dependent | Network-dependent | One-site limited | Very strong | Core + controlled satellites |
| Production Transparency | Existing-stock focused | Requires vendor verification | Direct site | Multi-site governance | Core/satellite roles disclosed |
Positioning note: MOVEVOX is not positioned as a replacement for every strategic-scale global manufacturer. Its strongest OEM fit is a brand requiring relatively flexible technical development, both Seamless and Cut-and-Sew capability and a controlled path into repeat commercial scale.
For supplier-evaluation guidance, see Activewear Sourcing Guides.
Use This Checklist When Qualifying an OEM Activewear Manufacturer
A useful OEM evaluation should test how well the supplier can protect and execute the buyer's specification from first review through repeat production.
| Evaluation Area | Questions to Ask | Evidence to Request | MOVEVOX Reference |
|---|---|---|---|
| OEM Definition | Does the supplier understand that the buyer owns the product specification? | OEM workflow and contract scope | Module 03 |
| Tech Pack Review | Does the supplier identify gaps and contradictions before sampling? | Real technical-review example | Modules 04 / 12 |
| Material Control | How are fabric, yarn and substitutions approved? | Swatches, material records, approval history | Module 14 |
| Fit Control | How do fit comments become measurable requirements? | POM, fit sample, size-set records | Modules 15–17 |
| Version Control | Which Tech Pack, pattern/program and artwork version enters production? | Revision history / release record | Module 22 |
| Sampling | How are V1, revisions and approval stages controlled? | Sample and approval evidence | Module 21 |
| MOQ | Is published MOQ the final OEM MOQ? | Project-specific MOQ assumptions | Module 23 |
| Sample-to-Bulk | How is the approved product transferred into production? | PP Sample / First Article / handover evidence | Module 22 |
| Quality | What is checked against the released specification? | QC plan and inspection records | Modules 29–30 |
| Capacity | Can the supplier support larger repeat orders? | WIP / capacity evidence | Module 26 |
| IP / NDA | How is proprietary product information protected? | NDA / confidentiality process | Module 05 |
| Production Sites | Where will the PO actually run? | Factory and allocation evidence | Modules 27 / 34 |
| Auditability | Can the buyer review the actual manufacturing site and records? | Factory-review or audit evidence | Module 33 |
Frequently Asked Questions About OEM Activewear Manufacturing
What does OEM activewear manufacturing mean at MOVEVOX?
For specification-led OEM projects, the buyer owns or controls the product direction and provides technical requirements such as a Tech Pack, measurements, material direction or approved reference. MOVEVOX reviews, develops and manufactures against the agreed product standard.
Do we need a complete Tech Pack before contacting MOVEVOX?
No. A complete Tech Pack is the strongest OEM starting point, but an incomplete specification, legal reference sample or other defined product information can be reviewed to identify what is missing before sampling.
Will MOVEVOX automatically follow every Tech Pack instruction?
MOVEVOX should review the specification for missing information, conflicting requirements, material feasibility, manufacturing route and commercial constraints before sampling rather than execute obvious problems without clarification.
Can MOVEVOX source the fabric specified in our Tech Pack?
MOVEVOX can review customer-nominated or specification-led material requirements and evaluate sourcing, MOQ and manufacturability. Availability and substitution requirements remain material-specific.
How is fit controlled during OEM development?
Fit feedback should be converted into measurable requirements, current pattern or Seamless-program changes and applicable sample approvals before production.
What is the MOQ for OEM activewear?
Current base references are approximately 100 pcs/style for Seamless and 150 pcs/style for Cut-and-Sew. Effective MOQ may increase because of custom fabric, dyeing, color, trims, branding or packaging.
How long does OEM sampling normally take?
Standard sample development typically takes about 5–10 working days after required development details have been confirmed. More complex specifications or additional revision rounds can extend the overall calendar.
Can MOVEVOX make both Seamless and Cut-and-Sew products?
Yes. The Yiwu core facility operates 28 Italian Santoni Seamless machines and approximately 24 main sewing and garment-production machines.
How do you control approved samples when moving into bulk?
The intended process links the current Tech Pack, pattern or Seamless program, approved material, fit, branding and applicable physical sample into pre-production and First Article review before wider bulk manufacturing.
What capacity can MOVEVOX support?
Current stable managed finished-garment capacity is approximately 150,000–200,000 pieces per month across the controlled manufacturing system. Actual availability requires project-specific review.
Can MOVEVOX review an NDA before we send proprietary files?
Yes. Buyer-provided NDA requirements can be reviewed before confidential technical or commercial information is exchanged where needed.
Can our company audit the factory?
MOVEVOX can discuss buyer-defined factory review and qualification requirements for the Yiwu core facility. No unsupported blanket third-party audit-pass claim is made.
More background is available in OEM Activewear, Manufacturing Guides and Quality Guides.
Start Your OEM Activewear Supplier Review
Send the technical and commercial information you already have so MOVEVOX can determine whether your product fits its OEM activewear development and manufacturing capabilities.
For specification-led projects, the most useful starting point is your current Tech Pack. You may also include an approved physical sample, measurement chart, material or yarn reference, Pantone, artwork, packaging requirements and available fit information.
Please identify the expected style quantity, color and size structure, target market and required timing. These details help distinguish garment base MOQ from the effective OEM minimum created by materials, dyeing, trims, branding or packaging.
If your product includes both Seamless and Cut-and-Sew styles, each SKU can be reviewed according to its actual structure rather than forcing the entire collection through one manufacturing route.
Established brands may also identify NDA requirements, approved production-site restrictions, buyer audit expectations, third-party inspection requirements, product-specific testing needs and existing approved supplier or material references.
The objective of the first review is not to accept every specification automatically. It is to determine whether MOVEVOX can manufacture the product responsibly and what information must be resolved before development moves forward.
Helpful Information to Include
- Name and company
- Business email
- Target market
- Product category
- Expected quantity
- Current development stage
- Tech Pack available: Yes / No
- Material / fit requirements
- Project details
- Tech Pack / reference files
Submission note: the final live submission should use the site's Elementor Form / Popup. This HTML section intentionally does not create a static form.